How To Get Rid Of Carpenter Bees

What are carpenter bees?

If you live in the continental United States, you are probably one of those individuals who confuses a carpenter bee with their cousin, the bumblebee, even though they looked similar at first glance they are quite different in behavior.  If you are seeking to learn how to get rid of carpenter bees, you should know that the carpenter bee is noticeably larger than the standard bee; people mistake them for bumblebees because they are usually just not aware of carpenter bees and what the differences between the two of them are.  Carpenter bees are highly efficient pollinators, with a propensity for open face flowers; and the habit of occasionally making openings in the side of flowers for the purpose of extracting the nectar that they obtain.  Unfortunately the same Carpenter bees have the capability of drilling holes in lumber products that are untreated, and this can become quite a nuisance to home owners and dwellers by virtue of such a relevant amount of damage that they are capable of inflicting upon a wooden dwelling.  As they drive their holes into the untreated wood of a dwelling they will take the chewed wood from the hole created to build walls for themselves, chambers if you will, for the purpose of creating a nesting spot for them.

Difference between carpenter bees and bumblebee

The best way to tell whether or not you are looking at a bumblebee or a carpenter bee would be to simply take notice of the abdomen first.  The abdomen of the eastern carpenter be is large shiny and black with yellow hair noticeable near the base next to the thorax of the Bee; whereas the traditional bumblebee has a very fuzzy or hairy abdomen that can be spotted across the center.  The carpenter bee tends to be a peace loving creature and they will not attempt to sting you except if they perceive you to be an eminent threat, and have no other alternative available to them to protect their nest and their offspring, they will put forth every possible effort to avoid direct human contact as it is their desire to just peacefully nest and tend to their own affairs.  When carpenter bees choose to drill holes into untreated wood products or timber, they will not inflict any structural damage that would compromise that particular dwelling for joist or floorboards that might be around a dwelling.  On the other hand if you happen to notice that there are numerous holes in a specific general area which have been drilled by carpenter bees, then this is something that you might want to pay attention, to make certain that there have not been so many holes bored into the wood that it has caused an inadvertent threat to the structural integrity of the dwelling. More motivation to get rid of carpenter bees!

About Carpenter bees

Full grown adult carpenter bees reside in canals, or gallery’s in the winter months and then makes their exit in the early spring for the purposes of mating.  The female carpenter bee, in the process of making preparations on the nesting site either by boring a new hole in a completely different locale, or by doing a little home improvement is simply making her current dwelling place larger by widening the gallery that she already resides in.  Once the female carpenter be has successfully completed the preparation of her nesting place, she will then deposit within the next very large amounts of pollen mixed with nectar which is commonly refer to bee butter.  Once the bee butter is deposited in the nesting spot, the carpenter be will lay her eggs in that same cell and seal it with a partition from the chewed wood to create a cell.  In figuring out how to get rid of carpenter bees, their have been known to be five to eight cells for every carpenter bee dwelling.  When the Bee larvae fully matures from having ingested the bee butter left behind by the mother, they will emerge from their cell as adult carpenter bees, usually 30 to 40 days after being put in the cell as an egg. This process usually occurs in the late summer of the year.

Now contrary to what some may believe a carpenter be does not actually eat or ingest the wood they bore through for the purposes of constructing tunnels, the chewed up would is actually gotten rid of outside of the whole when bored; and this process will frequently create a brown looking stain on or around the siding where the hole is located.  This happens to be one of the indicators that many individuals will use when figuring out how to get rid of carpenter bees, to determine whether or not they are dealing with a carpenter bee infestation.  Carpenter bees by and large are not as enamored of the presence of human beings as yellow jackets or paper wasp seem to be, they tend to be rather reclusive and would much rather be to themselves and far removed from the presence and certainly the interference of human beings.  This is one of the reasons why when the carpenter bee does bore a whole in untreated wood or timber, it tends to do it from the underside of the wood or timber.  Once they are fully inside of the wood and then begin to create a gallery that will traditionally be located to their right.  Carpenter bee galleries are usually around 6 feet in length; however if you happen to run across a gallery that has been in existence and in use for quite some time it is not unusual to find carpenter be gallery extending over 10 feet in length.

Carpenter Bees have a penchant for wood or timber that has not been treated or that has not been painted, they desire wood that has not been touched by any kind of chemicals at all. The people most likely to be saddled with a carpenter bee infestation are those that have a taste for architecture that consist of raw or untreated woods. It is the raw untreated woods that draw carpenter bees as honey does a honey bee.  They do have a purpose when it comes to the type of wood there going to bore holes into, this is their preferred way of creating a home for themselves and their offspring, for creating an environment in which they can reside in peace and security unlike season bees that will utilize just about anything as such in order to create for themselves a haven to reside.  This is probably the primary component that marks the carpenter bee uniquely different from its other counterparts, and helps in the process of how to get rid of carpenter bees.  True to their name carpenter bees lives their life laboring with different kinds of wood.  Male carpenter bees do not have the capacity to sting anyone but female carpenter bees do.

But the mail carpenter bee’s effort to exact a security for its family will buzz around an individual effort to distract or deter them, female carpenter be on the other hand is indeed have the capacity to sting and will only do so if it feels like it has no other alternative.  As for the female carpenter bee as the one that does the boring of the wood creating the cells, and which will ultimately deposit a large amount of bee butter for the perpetuation of the next generation of carpenter bees.  The hole that the female carpenter bee Boers is approximately 1/2 inch in diameter and she will make her hole in the wood at a depth of about 2 inches, and then make a 90 degree turn and begin to bore the primary tunnel; and this tunnel will be the primary residence of the carpenter bee and its family.  The purpose of the 90° degree or is to help to protect the primary residence of the carpenter bees from outside elements such as wind, rain, and other things that might come such as dirt to destroy their residence; perhaps even to make it more of a challenge for getting rid of carpenter bees.  The actual construction process tends to be slow but consistent; a female carpenter bee is boring her whole in the wood at a rate of about an inch a week.

How to get rid of carpenter bees

If you are looking for the best and most efficient way to get rid of carpenter bees, or you just want to help to protect yourself from a carpenter bee infestation, there are a variety of applications for you to consider using. One recommendation is for you to do is to use paint products on any outdoor wood that you may have. You may be wondering at this point whether or not you can use stains or varnishes instead of paint products, and the answer is yes you can; however paint products are the most highly recommended in this case; it is considered by most people that have dealt with carpenter bees to be the most effective choice when it comes to repelling carpenter bees. If you have any preexisting carpenter bee holes in your wood surfaces then it is recommended that you first apply an insecticide in and around the hole and to leave it open for a few days, then proceed to seal the hole before painting over the wood, or varnishing over it; whichever you decide. Using borates does not work due to the fact that the carpenter bees do not ingest the chemical that has been applied to the wood, they just chew it up and spit it out.

As you are doing any of this you want to make sure that you are using protective clothing so that if you happen to encounter a female carpenter bee then it will not end badly for you by being stung by it. She may take offense to the fact that you are making efforts to disrupt her dwelling place. You should also take the precaution of making sure that you have any and all outbuildings closed when it is mating season for the carpenter bee, so that they will not utilize these facilities to mate and subsequently build a nest inside of them. For the record, if you discover that your wall space contains bees in it, then know for a certainty that these are not carpenter bees. You definitely have a bee infestation problem when you hear them inside of your wall, but the good news is that they are not boring holes into your wood and compromising the strength of your structure. These bees are more than likely nesting honey bees and for the most part they do not pose any eminent danger to you or your house hold, as long as they remain inside of the wall. If you do have a desire to rid your home of honey bees in a wall, then you simply do the best you can to seal up any potential openings that you can find, but wait until the area is no longer being used by them so that you do not seal them in there and force them to find an alternate route.

One recommended way of fixing carpenter bee openings is to take some doweling in short lengths, and covers them in carpenters glue then insert them into the carpenter bee hole.  Then you can use wood putty to put over the whole, after it dries you can send it down so that it is a nice smooth surface, and then apply whatever paint you wish to apply at that point.  Due to their name carpenter bee’s labor and reside at a variety of wood types.  One primary difference between the male and female carpenter be is that the mail carpenter be does not have the capacity to sting anyone, it will however buzz an individual in an effort to distract or deter them from disturbing the nest.  The female carpenter be on the other hand does have the capacity to sting and it will only do so it feels to it is in a last resort situation in protecting the nest.  The female is also the primary builder of the nest; this is the bee that is going to do most of the work when it comes to boring the hole in the wood wide enough and even tough in order to create a nesting place for her and her children and the male bee.

She has the capacity of boring about an inch a week, which is pretty good progress when you consider that she’s doing this work all by herself.  All that the female carpenter bee will bore is approximately 1/2 inch in diameter and it will go into the added depth of about 2 inches, point there will be a 90° degree detour and will precede to tunnel into the wood angle, deep enough to ultimately create chambers in which she will lay her eggs.  The newest is created in this manner for the purpose of attempting to protect it from any kind of inclement weather or any other thing that might come to disturb the nest.  After that time will has been bored to adapt a 4 to 6 inches she will then precede to lay her eggs at the very end of that tunnel along with balls of pollen or bee’s butter for when the larva come out of the eggs.  She will then seal off that area in which she placed the pollen creating a sealed chamber for the infinite carpenter bees to be birthed in.  For reasons unknown eggs that are placed in the chamber when they hatch they will hatch in order opposite that they were placed into the chamber.  Some experts believe the process occurs this way so that the egg closest to the chamber wall will hatch first and subsequently exit the chamber opening up more space and opportunity for the next egg to do so.

So one of the most efficient ways of motivating carpenter bees to move to a location other than your dwelling is to undergo the process of treating the nest with insecticides so that it will discourage them from coming back to the nest and having more carpenter bee offspring.  This is but one of three popular primary methods of maintaining control over carpenter bees in your environment.  By utilizing a dust based pesticide can be blown into the actual chamber and then subsequently sealed and painted over is a way of deterring carpenter bees from returning to an old nesting area and nesting again.  Another method of motivating carpenter bees not to return to a nest or to not nest in the first place is by directly treating the wood.  This method tends to be a little more labor intensive because it requires you to treat the wood rather frequently, sometimes as much as once a month or even once every other month.  Some people do not feel comfortable with exposing their living environment to this much chemical on a consistent basis like this; so many people opt not to utilize this kind of treatment process to deter carpenter bees.

Some experts consider the very best method to utilize in the prevention and or control of carpenter bees is the use of bee traps.  There are numerous types of traps that you can utilize and they are usually hung in the area of overhanging of the roof of a dwelling.  Many in the traps do not require re-bating, as they were created to simulate prime conditions for carpenter bees to build and nest in.  Carpenter bees for the most part pose no imminent danger to human beings that dwell in the area of where they nest, of all the known bees species carpenter bees are the most docile of the bee’s to coexist with; however there are some circumstances in which the presence of carpenter bees is unwelcome either because they are destroying property by building their nest in the wood of a dwelling, or they’re just not welcomed in the presence of other people feel like they’re at risk of getting attacked in a unprovoked manner.  The carpenter bee desires to have a soft wood over hardwood when it comes to building its nest.  So when you are choosing woods use outside of your dwelling or in and out building, you might want to consider selecting a hardwood over a soft wood as a preemptive measure for deterring potential carpenter be infestation.

A female carpenter bee will find a hardwood challenging for her and or the process of boring a hole in order to create a nesting place, as will motivate her to move on to another potential location ultimately.  It seems that the softwood of choice for carpenter bees to bore holes into for the purpose of creating a nest is cedar wood.  Cedar wood works really great for deterring some other insects which is why many people have cedar closets or cedar chest; however it is not the case for carpenter bees.  They love the ease of access that cedar wood provides for them when it comes to their ability to easily bore into it to create their nest.  Hardwoods to consider when utilizing the use of Woodstock on the outside of your dwelling or another building on your property would be in Maplewood or even Oakwood; these are the least likely for a carpenter be to utilize to build their nest and dwelling, and make for an excellent deterrent for carpenter bee infestation.  Ultimately you want to do your math and see which wood is the most financially feasible alternative for you to utilize, whether to spend the money for a more expensive hardwood or to go with a standard wood and then perhaps treat it with a pesticide or a good paint job.


Remember if you are considering how to get rid of carpenter bees, they are repelled by woods that are treated with certain chemicals that are available, chemicals that are specifically engineered to help to repel insect infestations such as carpenter bees.  The old fashioned painting is another viable way for someone treat their wood service and help to get rid of carpenter bees from coming around and boring holes in the wood for the purpose of creating a nest.  Oftentimes these procedures successfully influence carpenter bees to look elsewhere to build their nest and do not like chemicals that some people treat their woods with, do not care for and it services, especially freshly painted surfaces.

Related Posts

  • How to get rid of Carpenter AntsHow to get rid of Carpenter Ants What are carpenter ants? Probably one of the most destructive forces in nature when it comes to someone's personal dwelling and insects […]
  • How to get rid of Bed BugsHow to get rid of Bed Bugs   Bed Bugs are commonly considered to be parasitic nocturnal insects that live on extracting blood from their host mammal such as […]
  • How to get rid of BatsHow to get rid of Bats   If you are one of the fortunate to have never had to ask the question of, "how to get rid of Bats;” then consider yourself most […]
  • How to get rid of Bug BitesHow to get rid of Bug Bites What you should know about bug bites If you are trying to figure out how to get rid of bug bites, I suppose the most obvious "duh" answer […]
  • How to get rid of BirdsHow to get rid of Birds Birds can make for perilous situation for people that are trying to maintain their own homes.  Birds have the ability to procreate […]